HardwareStatusPC - the program is used to monitor the status of your computers hardware. Displays computer sensor readings on the smartphone screen. Before use, you need to configure the server and client parts. The "Libre Hardware monitor" program serves as the server part. LHM is open, freely distributed software for both private and commercial use; it does not require installation (just place the program folder on your computer). You also need to create a rule that allows the program to use a specific port. The client part in the form of an Android application is supported starting from Android 5. Read more about the setup below.Program featuresWhen you start the program, after long pressing the settings button, a connection is made and information is displayed on the screen displaying some data about the current state of the computer hardware - the total load and temperature of the central processor, the total load and temperature of the video card, the amount of occupied RAM and its total load. In the settings section, you can configure the following parameters: which readings are displayed on the screen and which not, specify the names of the monitored sensors (it is necessary for the program to track the necessary ones by their name), set the font size of the sensor readings, specify the server and port (at which address to contact server part on the computer), set the background of the panel with readings (I decided to add support for skins to diversify the appearance. Who wants to look at a gray screen with numbers, right?). In the readings panel, the location of the displayed data can be changed by moving it with your finger across the screen (for example, in order to fit it to your background image).Information on setting up the client and error parts can be found on the official website of the application and in the Help section in the settings of the application itself. They consist of a couple of sharp steps 1. You need to create a rule for Libre hardware monitor on a PC for it to work correctly on a local network. 2. Start the monitoring server from the program. 3. In Hardware Status PC, enter the IP and port, indicate the names of the sensors that need to be monitored.
HardwareStatusPC
